TM 5-6675-315-14
Table 2-5. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. CUTTER MECHANISM WILL RUN IN REVERSE BUT NOT FORWARD - Cont
Step 6. Check cutter FORWARD switch VT for continuity.
If not present, replace switch (paragraph 2-16.11).
3.
CUTTER RUNS FORWARD BUT NOT IN REVERSE.
WARNING
Death or serious injury may occur from electrical shock unless power is secured before
servicing.
Step 1. Check for any loose wires in switch cabinet.
(a)
If all wires are connected properly, proceed to step 2.
(b)
Reconnect wires according to wiring diagram.
2-58
