TM 5-6675-315-14
2-13. SERVICE UPON RECEIPT.
2-13.1
Checking Unpacked Equipment.
a.
Inspect the equipment for damage incurred during shipment. If equipment has been damaged, report the
damage on DD Form 6, Packing Improvement Report.
b.
Check the equipment against the packing list to see if the shipment is complete. Report all discrepancies in
accordance with the instructions of DA Pam 738-750.
c.
Check to see whether the equipment has been modified.
2-14. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES.
a.
PMCS are designed to keep the equipment in good working condition by performing certain tests, inspections,
and services. The intervals provide you, the organizational technician, with time schedules that determine when to
perform specified tasks.
b.
Item number column. Item numbers are assigned in chronological ascending sequence regardless of interval
designation. These numbers are used for your "TM Number" column on DA Form 2404, Equipment Inspection and
Maintenance Worksheet, in recording the results of PMCS.
c.
Interval columns. This column determines the time period designated to perform your PMCS.
d.
Item to be inspected and procedures column. This column lists functional groups and their respective
assemblies and subassemblies as shown in the Maintenance Allocation Chart (Appendix B). The appropriate check or
service procedure follows the specific item to be inspected.
e.
List of tools and materials required for PMCS is as follows:
Item
Quantity
Cross Tip Screwdriver
1 ea
Multimeter
1 ea
Socket Head Key Set (with 6, 5, and 10 mm)
1 ea
Flat Tip Screwdriver
1 ea
Metric Combination Wrench Set
1 ea
General Purpose Detergent (Item 4, Appendix E)
1 pt
Cheesecloth (Item 3, Appendix E)
ar
Plastic Utility Pail
1 ea
Solvent, Cleaning, P-D-680 (Item 17, Appendix E)
ar
2-43
