TM 5-3610-287-10
2-7.
PREPARATION FOR MOVEMENT (CONT)
1. Disconnect hoses (1) from auxiliary pump (2) and from water inlet
pipe (3) on Section body.
2. Disconnect and store auxiliary pump power cord (4) in semitrailer
chassis tool box (5).
3.
Install dustcap (6) on water inlet pipe (3) on Section body.
4.
Store auxiliary pump (2) under sink in Section.
5.
Store hoses (1) in semitrailer chassis tool box (5).
6.
Lock curbside personnel door (7).
7.
Remove handrail (8) from curbside personnel door boarding ladder
(9).
NOTE
Two people are required to perform the next two steps.
8. Remove curbside personnel door boarding ladder (9). Insert
handrail (8) into back of boarding ladder.
9.
Secure curbside personnel door boarding ladder (9) on cargo door.
10.
Close and secure inclinometer covers (10).
11.
Disconnect wires from telephone entrance panel (11).
2-39
