TM 5-3610-286-20
2-87.
Double Sheet Detector Mechanism (cont).
c. Install. (figure 2-244)
(1)
(2)
(3)
(4)
(5)
(6)
Replace two grooved roller bearings (1), spacer (2), and roller (3) in bearings (4).
Position bearings (4) on feeder and replace two screws (5) in each bearing and tighten.
Position two halves of clamping piece (6), together with parts assembled to it, on feeder
and join with two socket-head screws (7) and safety washers (8).
Position cam lever (9) on clamping piece (6) and fasten with shouldered screw (10),
washer (11) and nut (12).
Position plate guide (13) on clamping piece (6) and fasten with two screws (14), two
safety washers (15) and two fiat washers (16).
Position microswitch (17) on double sheet detector and fasten with two screws (10).
2-494