TM 5-3610-286-20
2-86.
Sheet Forwarding Assembly.
This task covers:
a. Remove
b. Install
INITIAL SETUP
Tools
Retaining-ring pliers
Ball-peen hammer
10 mm combination wrench
5 mm hex key
a. Remove. (figure 2-240)
(1)
(2)
(3)
(4)
(5)
(6)
2-486
Pull hoses (1) off air distributor (2).
Remove cap screw (3), safety washer (4), and air distributor (2).
Remove retaining ring (5) and fitted disc (6) from end of sucker guide tube (7).
Pull guide shaft (8) off sucker guide tube (7) and out of lever (9). Pull sucker guide tube
out of lever.
Pull plug (10) out of sucker guide tube (7).
Unscrew nut (11) from end of threaded pin (12). Remove safety washer (13), spacer ring
(14), bearing (15), pin, and lever (9).
