Figure 2-220.
TM 5-3610-286-20
2-78.
Lubrication Distribution System (cont).
b. Replace. (figure 2-220)
NOTE
This replacement procedure is typical for all oil lines and distribution units in
the lubrication distribution system.
(1) Loosen nut (1) and remove oil line (2).
(2) Remove fitting (3).
(3) Remove screw (4), washer (5), and oil distribution unit (6).
(4) Position distribution unit (6) and replace washer (5) and screw (4).
(5) Replace fitting (3).
(6) Replace oil line (2) and tighten nut (1).
2-442
