TM 5-3610-286-20
2-79.
Main Motor and Drive Assembly (cont).
d. Repair.
(1) Main motor removal. (figure 2-221)
(a)
(b)
(c)
(d)
(e)
(f)
(9)
(h)
(l)
(j)
(k)
Hazardous electrical voltages exist within printing press, Do not connector
disconnect any electrical components while power is on. Death, serious
electrical shock, or burns may result.
Remove connector F (1).
Remove four hex-head screws (2) and cover (3).
Tag wires for identification.
Remove terminal hex nuts (4), washers (5), and wires (6).
Twist cable collar (7) to the right and remove cable (8).
Remove four mounting bolts (9), four washers (10), and remove main motor (11).
Replace main motor (11), four washers (10), and four mounting bolts (9).
Replace cable (8) and tighten cable collar (7).
Replace tagged wires (6), washers (5), and hex nuts (4).
Replace cover (3) and four hex-head screws (2).
Replace connector F (1).
2-446
