Figure 2-204.
TM 5-3610-286-20
2-75.
Blanket Cylinder Assembly (cont).
(2) Spring loaded supporting rollers. (figure 2-204)
(a) Remove two hex-head screws (1) and covers (2) and O/S and D/S of delivery end of
press.
(b) Tighten roller spring bolts (3) on O/S and D/S until top surface of washer (4) is 11 mm
below surface of the side frame (5).
NOTE
At this spring compression, spring pressure of 600 Kg is achieved.
(c) Replace O/S and D/S covers (2) and replace two hex-head screws (1).
2-416
