TM 5-3610-286-20
2-67.
Ranger Drum Shaft Assembly (cont).
(c) Drive gears. (figure 2-160)
NOTE
Ranger drum assembly should be rotated until compression springs on gripper
bar are up and horizontal.
1 Replace woodruff key (1).
2 Replace flange (2) and aline with key (1).
3 Replace retaining ring (3).
4 Replace tapered locator pins (4) and (5).
5 Replace gear (6) and aline locator hole in gear with locator pin (5).
6 Replace three ribbed washers (7) and socket-head screws (8).
7 Replace gear (9) and aline with locator pin (4).
8 Replace four ribbed washers (10) and socket-head screws (11).
9 Replace idler gear (12) and retaining ring (13).
2-354
