TM 5-3610-286-20
2-67.
Ranger Drum Shaft Assembly (cont).
(2) Assembly.
(a) Sheet segment guides. (figure 2-158)
Replace segments 2 and 4 (1) and replace washers (2) and socket-head screws (3).
Do not tighten screws.
Replace spring rod guide (4) between segments 2 and 4 (1) and lockwashers (5),
washers (6), and replace hex-head screws (7). Do not tighten screws.
Replace springs (8) on sleeve guides (9).
Tighten screws (3, 7) on segments 2 and 4 (1).
Repeat steps 1 through 4 for segments 2 and 8.
Replace segments 1,3,5,7, and 9 (10) and in turn, replace washers (2) and
socket-head screws (3) for each.
2-350
