TM 5-3610-286-20
2-65.
Cylinder Safety Guard Assembly (cont).
c. Install. (figure 2-151)
(1) Install bracket (1) with two bolts (2).
(2) Install switch (3) on bracket (1) with two screws (4).
(3) Install cable (5) into switch (3) and connect wires to terminals as tagged. Tighten lock nut
(6) and remove tags.
(4) Close cover (7) and secure with two screws (8).
(5) Install both guards (9) with four rivets (10), four flat washers (11), and four cap
screws (12).
(6) Install safety guard (13) with two turnlock fasteners (14).
2-336
