TM 5-3610-286-20
2-47.
Register Scope.
This task covers:
a. Replace
b. Adjust
INITIAL SETUP
Tools
Equipment Conditions
3 mm hex key
Plate cylinder guard removed (TM 5-3610-286-10)
a. Replace. (figure 2-97)
(1)
(2)
NOTE
Socket heads on socket-head mounting screws are filled with paint. Clean out
paint before attempting to insert hex key.
Remove two socket-head screws (1), two ribbed washers (2), two register scope brackets
(3), and shims (4).
NOTE
There are two shims (normally) under each bracket. The 0.3 mm shim is
mounted closest to the plate cylinder.
Replace shims (4), two register scope brackets (3), ribbed washers (2), and two socket-
h e a d s c r e w s ( 1 ) .
2-236
