TM 5-3610-286-20
2-42.
Disengaging Assembly (cont).
b. Repair. (figure 2-88)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Slide bearing bracket (1) off shaft (2).
Remove two spring tension pins (3) and remove shaft (2) and washer (4) from
disengaging cam (5).
Remove hex nut (6), washer (7), and stop pin (8).
Remove needle bushing (9) from bearing bracket (1).
Replace frozen or binding needle bushing (9). Replace broken or missing stop pin (8).
Replace needle bushing (9) in bearing bracket (1).
Replace stop pin (8), washer (7), and hex nut (6).
Replace shaft (2) and washer (4) on disengaging cam (5) and replace two spring tension
pins (3).
Slide bearing bracket (1) onto shaft (2).
2-218