TM 5-3610-286-20
2-40.
Dampening Swivel Lever Assemblies (cont).
(2) Dampening swivel lever assemblies (O/S, D/S). (figure 2-82)
(a)
(b)
(c)
(d)
(e)
(f)
(9)
(h)
(i)
(j)
2-206
NOTE
Procedure shown in figure 2-82 is for O/S.
Remove hex nut (1), adjusting screw (2), and sleeve (3).
Remove retaining ring (4) and washer (5).
Remove spring rod (6), rod guide (7), washer (8), and spring (9).
Remove retaining ring (10) and washer (11).
Remove lower swivel lever (12) and shims (13).
Loosen adjusting screw (14) to relieve spring tension.
Loosen hex nut (15).
Remove spring rod (16), hex nut (15), two washers (17), spring (18), and
sleeve (19).
Remove adjusting screw (14) and spring rod guide (20).
Remove upper swivel lever (21).