TM 5-3610-286-20
2-39.
Disengaging Shaft Assembly (cont).
c. Install. (figure 2-80)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
2-202
Install lever (1) and two tension pins (2) on shaft (3).
Install stud (4) and spring tension pin (5) on shaft (3).
Install handle (6) and spring tension pin (7) on shaft (3).
Install two guide pieces (8), washers (9), compression springs (10), and lock nuts (11)
on spring rods (12).
Install spring rods (12) in rod heads (13) and tighten lock nuts (11).
Slide shaft (3) in through O/S or press frame and install two lockout levers (14) when shaft
end passes through press frame.
Install two washers (15) and two retaining rings (16).
Aline holes in lockout lever (14) with holes in shaft (3) and install two taper pins (17).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Replace dampening fountain (para. 2-37).
(2) Replace form dampening rollers (TM 5-3610-286-10).
(3) Replace main guard (D/S) (para. 2-20).
(4) Replace upper guard (O/S) (para. 2-18).
(5) Adjust swiveling lever (TM 5-3610-286-10).
