TM 5-3610-286-20
1-8.
Location and Description of Major Components (cont).
(1) Solution container group (01).
(a) Tube assembly, Located on D/S frame, Regulates flow of fountain solution from solution
container to fountain tray through a hose and valve.
(b) Solution container assembly. Contains mixture of plate etch and water used to dampen
the plate.
(c) Container shelf assembly. Located on main guard. Shelf holds solution container.
(2) Main guard group (02).
(a) Inking fountain guard. Covers inking rollers. Associated safety switch automatically cuts
power to the printing press if guard is opened while printing press is running. This prevents injury to
personnel and damage to press components. Guard must be closed before operation can continue.
(b) Belt guard. Covers main motor drive belt and flywheel to prevent injury to personnel.
(c) Upper guard and accessories (O/S). Covers control mechanisms for cylinders and
inking and dampening assemblies. Provides access for removal and adjustment of selected ink rollers
and for cylinder adjustments.
(d) Lower guard and accessories (O/S). Covers control mechanisms, timing cams, and
delivery assembly controls.
(e) Main guard assembly. Covers drive side gears adjacent to inking roller assembly. Also
serves as a mount for container shelf assembly.
(3) Inking group (03).
(a) Manual inking roller. Located behind ink fountain on top of printing press. Functions as a
vibrator roller during normal operation. Can also be used during an ink color change on short runs
when main ductor is locked off. This saves washing the entire fountain by applying another color
directly to the inking assembly.
(b) Inking roller. Located at top of press between frames. Moves ink from ink fountain to
plate. ink is metered using a combination of hard and soft rubber rollers to smooth and distribute ink
evenly to the plate.
(c) Form rollers limit switch. Located on operators side frame. Protects form rollers by
preventing printing press operation if form rollers are not properly seated and locked into form roller
journals.
(d) Ink fountain assembly. Located on top of printing press on delivery end. Consists of an
ink reservoir; a large, flat blade; keys; and a roller. Adjustable keys regulate ink fiow between
fountain roller and ductor roller blade. Turning keys increases or decreases ink flow.
(e) Wash up container assembly removable item. Mounted on the inking assembly frame
when in use. Consists of a long, rubber blade attached to long, trough-shaped catch pan. Used
during wash up procedures. Acts as squeegee when cleaning solvent is sprayed on rollers and
printing press is run at wash-up speed. Stored in container on feeder O/S when not in use.
1-6
