TM 5-3610-286-20
2-30.
Vibrator Roller Bearing Assembly.
This task covers:
a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
Equipment Conditions
5 mm pin punch
Main guard assembly (D/S) removed (para. 2-20)
Ball-peen hammer
Upper guard and accessories (O/S) removed
Retaining-ring pliers
(para. 2-18)
a. Remove.
(1) Pull rod and spring rod. (figure 2-51)
(a) Remove two retaining rings (1), two washers (2), and pull rod (3).
(b) Remove tapered pin (4), retaining ring (5), and washer (6).
(c) Remove lever (7), spring rod (8), spring (9), and washer (10).
2-148
