TM 5-3610-286-20
2-22.
Manual Inking Roller Assembly (cont).
(2) Manual inking roller. (figure 2-29)
(a)
(b)
(c)
(d)
(e)
(f)
2-98
Assure that O/S lever (1) is in roller down position and D/S lever(2) is in roller up
position.
Install inking roller (3) shaft fully into hole in D/S lever (2).
Rotate O/S lever (5) to roller up position.
Slide inking roller O/S shaft into hole in O/S lever(1).
Aline pin holes in roller shaft with holes in levers, and install pins (4).
Rotate roller to down position using handle (5) or (6).
