TM 5-3610-285-14
CAUTION
Glass surface must be handled with care to avoid chipping or breaking.
d. Remove glass surface and set aside.
e. Remove seven screws and back cover panel.
f. Remove screws and defective ballast transformer.
g. Tag and cut wires from ballast transformer.
h. Connect wiring on new ballast transformer with wire nuts and remove tags.
i. Install new ballast transformer and secure with screws.
j. Reinstall back cover panel and secure with screws.
k. Reinstall glass surface.
l. Turn clips 90° to secure glass surface.
m. Reinstall screws on clips. Tighten all screws.
n. Plug in power cord and turn power switch ON.
8-23
