TM 5-3610-285-14
b.
Remove one screw from each of four clips. Loosen other screws.
c.
Turn clips 90 to left or right.
CAUTION
Glass surface must be handled with care to avoid chipping or breaking.
d.
Remove glass surface and set aside.
e.
Remove seven screws and front cover panel.
f.
Tag and cut wires.
g.
Remove inner and outer strain relief bushings and remove defective power cord.
h.
Reinstall inner and outer strain relief bushings on new power cord.
i.
To install, connect wires to power cord with wire nuts and remove tags.
j.
Reinstall front cover panel and secure with seven screws.
k.
Reinstall glass surface.
l.
Turn clips 90 to secure glass surface.
m.
Reinstall screws on clips. Tighten all screws.
n.
Plug in power cord and turn power switch ON.
8-21
