TM 5-3610-285-14
INDEX - Cont
PROCEDURES
PARAGRAPH
Replace Logic Board Assembly ........................................................................................
7-20.3
Replace Power Supply Board Assembly...........................................................................
7-20.4
Replace Display Board Assembly ....................................................................................
7-20.5
Replace Photomultiplier Board Assembly .........................................................................
7-20.6
7-20.1 Replace CHANNEL Control Switch .
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Tool Kit, Electronic Repair
Flat Tip Screwdriver
Hex head Key Wrench Set
Nut Driver Set
Soldering Iron
SUPPLIES:
CHANNEL Control Switch
Solder
WARNING
Death or serious injury may occur from electrical shock unless power cord is
unplugged before repairing equipment.
a.
Unplug power cord.
b.
Unplug reflection/transmission probe cable.
c.
Remove four screws and chassis cover.
d.
Remove four screws securing filter light shield to chassis and remove light shield.
e.
Remove photomultiplier board assembly (paragraph 7-20.6, steps e through h).
f.
Remove CHANNEL control knob.
7-65
