TM 5-3610-285-14
b.
Remove glass jars from around intake and exhaust.
c.
Carefully remove intake and exhaust filter assemblies.
d.
Replace glass jars around intake and exhaust.
e.
Remove vacuum hose from intake fitting. Install short length of vacuum hose on fitting.
f.
Turn on vacuum pump switch, and suction 1 to 2 ounces of solvent into inlet through short length of vacuum
hose. Repeat as necessary.
g.
Turn off power switch for vacuum pump.
h.
Remove short length of vacuum hose from intake fitting and reinstall end of hose to vacuum control box.
i.
Remove jars and carefully reinstall intake and exhaust filter assemblies.
j.
Reinstall glass jars around intake and exhaust.
6-55
