TM 5-3610-285-14
5-6. OPERATION UNDER USUAL CONDITIONS.
5-6.1 Assembly and Preparation for Use.
NOTE
The following procedures assume that the processor has been properly installed; replenisher tanks are installed;
racks and crossovers are not installed; and top cover is off.
a.
Perform before operation (B) PMCS (Table 5-1).
b.
Connect water supply line to external fill inlet of recirculation tank.
c.
Connect hose to external drain.
d.
Close drain valve and top off water in recirculation tank.
e.
Remove water supply line and drain hose.
5-45
