TM 5-3610-285-14
m. Reinstall ribbon cable for digital display onto control circuit board as previously noted.
n.
Install timer plate mounting frame, with control circuit board attached. Secure with four self-locking nuts.
o.
Reconnect wiring to control circuit board.
p.
Install integrator circuit board onto control circuit board.
q.
Carefully lift control panel onto its mount.
r.
Reinstall mounting screws for control panel.
s.
Rotate glass frame into horizontal position, and lock into place with frame release knob.
t.
Turn on power panel circuit breaker.
2-20.3
Replace Digital Display Board (DD).
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Tool Kit, Electronic Repair
Flat Tip Screwdriver
Hex Head Key Wrench Set
Nut Driver Set
SUPPLIES: Digital Display Board
WARNING
Death or serious injury may occur from electrical shock unless power is turned off before servicing.
a.
Turn off power panel circuit breaker.
2-108
