TM 5-3610-285-14
2-16.9 Replace Glass Frame Glass.
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS:
Tool Kit, Light Machine Repair
Hex Head Key Wrench Set
SUPPLIES: Glass
Rope or Heavy Twine, Approximately 3 Feet (Item 65, Appendix E)
WARNING
Serious injury may occur if inadequate number of personnel are used to remove/install glass. This glass
weighs 35 lbs.
To prevent serious injury, remove all pieces of broken glass possible, prior to raising glass frame to an
upright position.
a.
Unlock left- and right-hand latches and lift glass frame until the lift arms take hold and open the glass frame
completely.
b.
Remove E clips from both lift arm bracket pins and remove pins.
c.
Allow lift arms to lie horizontally inside platemaker frame.
d.
Secure glass frame in an upright position by tying twine or rope from the left- and right-hand latches to pipes
from water tank.
WARNING
Additional pieces of broken glass may fall from frame as holddowns are removed or loosened. Exercise
extreme caution to prevent personal injury.
2-70
