TM 5-3610-285-14
c.
Remove mounting screws for control panel.
d.
Carefully lift the control panel from its mount.
e.
Tag and disconnect wires for proximity switch at the terminal block behind the control panel.
f.
Remove mounting screws and defective proximity switch. From the proximity switch, pull wiring through the
platemaker frame.
g.
Install new proximity switch with wiring, and thread wiring through the frame, to the terminal block behind the
control panel.
h.
Reconnect wires for proximity switch at the terminal block.
i.
Replace control panel on its mount, and secure with mounting screws.
j.
Rotate glass frame into horizontal position and lock into place with frame release knob.
k.
Turn on power panel circuit breaker.
2-55
