TM 5-3610-259-14
1.4.3 ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
a.
Always keep in mind the WARNINGS and CAUTIONS when performing PMCS. Table 1-
3 lists the PMCS procedures to be performed.
Be sure to perform the PMCS at
the frequency indicated by the INTERVAL codes in the table.
b.
If your equipment fails to operate, troubleshoot with the proper equipment.
Report any deficiencies in accordance with DA PAM 738-750.
NOTE
If the equipment must be kept in continuous operation, check
and service only those items that can safely be checked and
serviced without disturbing operation.
Make the complete
checks and services when the equipment can be shut down.
c. The numbers found in the ITEM NUMBER column shall be used as a source of item
numbers for the TM ITEM NUMBER column on DA Form 2404, Equipment Inspection
and Maintenance Worksheet, in recording the results of PMCS.
d. Preventive maintenance checks and service for the air conditioners/heaters
are contained in TM 5-4120-367-14.
e. List of tools and materials required for PMCS is as follows:
Item
Quantity
Hand Wire Brush
1 ea
8 in. Adjustable Wrench
1 ea
Cross-Tipped Screwdriver
1 ea
Flat-Tipped Screwdriver
1 ea
Wrench Set
1 ea
Scraper
Multimeter
Cloths
Electrical Insulating Tape
Paint
Paint Brush
Abrasive Paper
Padlock
Air Vent Filters, Small
1 ea
1 ea
ar
ar
ar
1 ea
ar
1 ea
2 ea
Air Vent Filter, Large
1 ea
1-56
