TM 5-3610-259-14
4.
Rotate defective lamp until lamp prongs are free from slot and
remove lamp.
5.
Remove filter and end cap; reinstall on new lamp.
6.
Insert new lamp prongs into slot and rotate lamp 90 degrees.
7.
Reinstall safety tab into lamp socket.
8.
Reinstall diffuser.
9.
Turn power on.
1.3.3.2 SERVICE VENTILATION DUCTS.
TOOLS: Vacuum Cleaner
Cross-Tipped Screwdriver
SUPPLIES: None
1.
Cover equipment to prevent dust from entering equipment.
2.
Close all doors and cabinets.
3.
Remove any documents or other work that may be damaged by dirt/dust.
4.
Turn off air conditioners/heaters.
5.
Remove
6.
Remove
7.
Vacuum
four screws from each ventil
all duct deflectors.
dirt or dust from deflector
ation duct deflector.
louvers.
1-53