TM 5-3610-259-14
1.3.3.3
8.
Insert vacuum cleaner probe into ventilation duct at each deflector
hole, and vacuum as far as probe will reach.
9. Reinstall deflectors and secure with four screws.
10. Vacuum any dislodged dirt or dust from interior of section.
11. Turn on air conditioners/heaters.
12.
Remove covers from equipment for operation.
REPLACE BLACKOUT/DOME LIGHT.
TOOLS: None
SUPPLIES: Lamp (12 V)
Silicone Spray, (Item 60, Appendix E)
NOTE
Blackout light and dome light are sealed units. No bulb
replacement is possible.
Complete light must be replaced.
1.
Push light and gasket up into opening.
2. Tilt and remove light and gasket from opening.
3.
Disconnect light from connector.
4. Connect new light to connector.
5. Reinstall gasket in opening.
NOTE
The use of silicone spray on the gasket will help
to position light.
1-54