TM 5-3610-259-14
TO PREVENT DEATH OR SERIOUS INJURY, DO NOT HANDLE
OR CLEAN POWER CABLE OR CONNECTORS WHEN CABLE IS
CONNECTED TO POWER SOURCE.
NOTE
The section must be properly grounded before power
is connected.
If it is not possible to drive the
three sections of ground rod fully into ground, the
rods may each be driven into the ground separately
and connected in series.
If it is impossible to
drive a ground rod, a suitable alternative ground
must be found, such as a buried metal water pipe.
Refer to TC 11-6, Grounding Techniques.
1-35
