TM 5-3610-259-14
c.
Tag and disconnect wires from both ends of
d.
Loosen three clamps holding tubular heater
tubular heater.
e.
Install and center new tubular heater into
CAUTION
Do not overtighten nuts holding wires in place or
damaged.
f. Reinstall wires to ends of tubular heater.
either side of wire connector.
tubular heater.
in place and remove defective
housing, and tighten clamps.
tubular heater may be
Be sure that a washer is on
g.
Reinstall blowers/heater housing front cover panel.
h.
Plug in power cord.
3-29