TM 5-3610-259-14
c.
Remove mounting screws for control panel.
d. Carefully lift control panel from its mount to gain access to wiring.
e.
Tag and disconnect wires from defective switch.
f. Push in spring clip retainer around switch and remove defective switch
through top of control panel.
9.
Install new switch through top of control panel and snap into place.
h. Reconnect wiring to new switch.
i.
Carefully lift control panel onto its mount.
j.
Reinstall mounting screws for control panel.
k. Rotate glass frame into horizontal position and lock into place with
frame release knob.
1.
Turn on power panel circuit breaker.
2-77
