TM 5-3610-259-14
2-16.9 Replace Glass Frame Glass.
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS:
Tool Kit, Light Machine Repair
Hex Head Key Wrench Set
SUPPLIES: Glass
Rope or Heavy Twine, Approximately 3 Feet (Item 45, Appendix E)
WARNING
l
Serious injury may occur if inadequate number of personnel are used to
remove/install glass.
This glass weighs 35 lbs.
l
To prevent serious injury, remove all pieces of broken glass possible,
prior to raising glass frame to an upright position.
a.
b.
c.
d.
Unlock left- and right-hand latches and lift glass frame until the lift
arms take hold and open the glass frame completely.
Remove E clips from both lift arm bracket pins and remove pins.
Allow lift arms to lie horizontally inside platemaker frame.
Secure glass frame in an upright position by tyinq twine or rope from
the left- and right-hand latches to pipes from water tank.
WARNING
Additional pieces of broken glass may fall from frame as holddowns are removed
or loosened.
Exercise extreme caution to prevent personal injury.
2-70
