TM 5-3610-259-14
d. Carefully remove three E clips on pivot pin at base of lift arm,
e.
Using pliers, carefully remove pivot pin toward outside of platemaker.
f. Remove lift arm bracket from glass frame.
9.
Remove E clip from lift arm bracket pin and remove pin and defective
lift arm.
h.
Install new lift arm, and lift arm bracket pin into lift arm bracket and
retain in place with E clip.
i.
Reinstall lift arm bracket on glass frame.
NOTE
Lift glass frame slightly to aid in alining holes for pivot pin.
j.
Reinstall pivot pin through outside frame, through lift arm and into
inside frame.
k. Reinstall E clips on pivot pin.
l.
Remove item used to prop up glass frame.
m.
Lower glass frame and lock left- and right-hand latches into place.
2-69
