TM 5-3610-259-14
CONTROL OR INDICATOR
FUNCTION
Vacuum Gages (2)
Vacuum Pump Switches (2)
Indicate vacuum pressure in the
vacuum frames.
Scaled from 0-30
lbs.
Apply power to the vacuum pumps.
Vacuum Bleed Valves (2)
Used to relieve or adjust the
vacuum pressure.
Digital Display
Displays units of light entered.
Counts down during exposure.
Returns to entered units of light
at end of exposure.
Keypad
EXPOSING Indicator Lamp
POWER ON Lamp
Used to enter units of light to be
used for exposure.
Contains digits
0-9.
“C” key is used to cancel
entered numbers or operation in
progress, prior to pressing the “T”
key.
The “T” key is used to start
exposure process.
Indicates exposure in progress.
Indicates master POWER switch is
on.
MANUAL Switch
Used for manual control of exposure
time.
Master POWER Switch
Applies power to control circuits,
fan motors and blower.
Frame Release Knob
Used to unlock and lock vacuum
frames.
Pulling knob out allows
frames to be rotated.
Master Circuit Breaker
Circuit breaker for control
circuits.
Located behind lower
cabinet door.
2-11
