TM 5-3610-257-14
g.
Turn safety switch OFF.
h.
Have power cable disconnected at supply end. Then disconnect power cable from receptacle. Put
cable in storage box on trailer chassis.
i.
Turn emergency light switch OFF.
j.
Disconnect telephone cables from power and communications panel.
CAUTION
To prevent loss of rod or thread damage, do not allow ground rod to rotate and unscrew when
removing the slide hammer rod.
k.
Remove ground rod with slide hammer, and put ground rods, couplings, and slide hammer inside
section. Clean threads on each ground rod before storing.
NOTE
Be certain ventilation fan cover and make up air vent door is securely closed.
l.
Reinspect section interior for loose equipment and close all vents.
m.
Close section. Secure and lock all personnel doors and cargo door.
NOTE
Be sure air conditioner/heater covers are down and secured.
n.
Remove handrails from boarding ladders.
o.
Remove boarding ladders and insert handrails into back of ladders.
p.
Secure ladders to back of section.
q.
Fully extend landing gear.
r.
Retract leveling jacks.
s.
Visually inspect section exterior to be sure all equipment and covers are secured.
1-47