TM 5-3610-257-14
WARNING
Do not plug or unplug electrical cord while standing on a wet or damp surface. Death or serious
injury may occur.
(29)
Fill water storage tank assembly.
(a)
Plug utility pump cord into outside receptacle.
(b)
Open red, blue and yellow gate valves under the sink.
(c)
Fill water storage tank until water flows from water drain hose.
(d)
Unplug utility pump cord from outside receptacle.
(e)
Allow utility pump to cool for twenty minutes.
(30)
Disconnect hoses from WATER INLET, utility pump, and water source.
(a)
Install pipe cap on WATER INLET.
(b)
Store hoses.
(c)
Store utility pump.
(31)
Close red, yellow, and blue gate valves under the sink.
1-44
