TM 5-3610-257-14
4-16.10.
Replace SLOPE Control.
MOS: 35E, Special Electronic Devices Repairer
TOOLS: Flat Tip Screwdriver
Combination Wrench Set
Soldering Iron
SUPPLIES:
SLOPE Control (Potentiometer)
Solder
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before
servicing.
a.
Remove densitometer (paragraph 4-20.1).
b.
Remove chassis cover.
c.
If SLOPE control is under filter light shield, remove four screws securing filter light shield; remove light shield.
d.
Tag and unsolder wires from SLOPE control.
e.
Remove nut securing SLOPE control from chassis
d.
Remove defective SLOPE control.
e.
Install new SLOPE control.
f.
Solder wires and remove tags.
g.
Install light shield (if removed).
h.
Install chassis cover.
i.
Install densitometer (paragraph 4-20.1).
4-33