TM 5-3610-257-14
4-16.9. Replace Voltage Selection Switch.
MOS: 35, Special Electronic Devices Repairer
TOOLS: Flat Tip Screwdriver
Combination Wrench Set
Soldering Iron
SUPPLIES:
Voltage Selection Switch (Volt Switch)
Solder
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before
servicing.
a.
Remove densitometer (paragraph 4-20.1).
b.
Remove chassis cover.
c.
Tag and unsolder wires from voltage selection switch.
d.
Remove voltage selection switch from chassis.
e.
Install new voltage selection switch.
f.
Solder wires and remove tags.
g.
Install chassis cover.
h.
Check that voltage selection switch is in correct position for voltage source.
i.
Install densitometer (paragraph 4-20.1).
4-32
