TM 5-3610-257-14
Table 3-5. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
EXPOSURE CONTROL INSTRUMENT WILL NOT TURN ON.
Step 1.
Check that power cord is plugged in.
Plug in power cord.
Step 2.
Check circuit breaker at power panel.
Reset circuit breaker.
WARNING
Death or serious injury may occur from electrical shock unless power cord is unplugged before
servicing.
Step 3.
Check for defective power fuse(s).
(a)
Remove power cord from outlet.
(b)
Remove fuse by pushing holder in and turning holder to left.
(c)
Check fuse(s); replace defective fuse(s).
3-50
