TM 5-3610-257-14
d.
Using flash dial.
NOTE
• By holding knob, numbered dial can be moved separately from the knob to set range of screen
under NO FLASH position of knob.
• With highlight density of .30 or less, one of the three red lamps on left side of dial will be on.
(1)
Set basic density range of screen (as determined) under NO FLASH position of knob.
(2)
Turn knob to position shadow density of copy opposite lamp that is on to compute correct flash exposure.
NOTE
Flash test position is used in making a test of flash time required for desired shadow dot.
e.
Exposing line copy. Time unit dials make possible a quick and accurate setting based on seconds of exposure for
line copy.
Example:
(1)
Standard line exposure is 18 seconds.
(2)
HIGHLIGHT UNITS presently set at 10 seconds (100 units).
3-28
