TM 5-3610-257-14
NOTE
Adjustment of MAIN UNITA automatically adjusts HIGHLIGHT UNITS to same number of seconds.
Flash exposure cycle of approximately 10 seconds 10 seconds at 100 times units.
(a)
Position main power switch to ON.
(b)
Place camera copyboard in proper position for exposure .
(c)
Position camera lamps to provide even film exposure.
NOTE
Filter is positioned under calibration wedge. Filters provided with the section must be trimmed to
the same width as the wedges. Filters may be held in place with a small piece of tape at the top of
the filter. Be sure tape does not cover opening of phototube.
(d)
Place filter for each color and calibration wedge under each diffuser.
3-22
