TM 5-3610-253-14
NOTE
Tag electrical connections before removal to be sure of proper reconnection.
c.
Tag and remove wiring to safety cover switch on underside of top cabinet
cover.
Remove screws, washers, and nuts retaining safety cover switch to
d.
-
top cabinet cover. Remove safety cover switch.
Replace safety cover switch.
Reinstall retaining screws, washers
e.
and nuts but do not tighten.
f.
Adjust position of switch so that it will activate immediately when
safety cover is raised. Tighten screw.
Reconnect wiring.
g.
h.
Reinstall top cabinet cover.
i.
Test operate to be sure safety switch is correctly adjusted.
Remove cover and readjust switch as necessary.
j.
k.
Install top cabinet cover and retaining screws.
l.
Plug in power cord.
MOS :
83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
SUPPLIES:
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
4-26