TM 5-3610-253-14
CAUTION
If force is used in closing stitcher head door, the stitcher will be
damaged. If door binds, manually depress supporter until the swivel
clears supporter and the door will close.
Close stitcher head door.
g.
h. Reinstall belt rear guard and tighten screw.
i.
Plug in power cord.
3-9. TROUBLESHOOTING PROCEDURES.
a. The table lists the common malfunctions which you may find during operation or
maintenance of the paper stitcher. You should perform the test/inspections and
corrective actions in the order listed.
b. This manual cannot list all malfunctions that may occur, nor all test or
inspections and corrective actions. If a malfunction is not listed or is not
corrected by listed corrective actions, notify your supervisor.
Table 3-3. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. STITCHER DOES NOT OPERATE. MOTOR DOES NOT TURN.
Step 1. Check to see if power cord is unplugged.
If power cord is plugged in, proceed to step 2.
(a)
(b)
Plug in power cord.
Step 2. Check power switch to see if thermal relay on switch tripped.
If relay is not tripped, proceed to step 3.
(a)
(b)
Reset power switch.
Step 3. Check circuit breaker in power panel.
(a)
Reset circuit breaker.
Refer to organizational maintenance.
(b)
3-24
