TM 5-3610-253-14
a.
Remove air conditioner/heater (paragraph 1-20.8).
b. Cut drain tube ties, and remove drain tube from support bracket.
c.
Remove bolts, lockwashers, and washers securing support bracket.
d. Remove defective support bracket.
e.
Install new support bracket.
Secure to section with bolts, lockwashers,
and washers.
f. Reinstall drain tube on support bracket and secure with new ties.
Reinstall air conditioner/heater (paragraph 1-20.8).
9.
Replace Ventilation Duct.
MOS: 52C, Utilities Equipment Repairer
TOOLS: Hacksaw
Electric Drill and Bits
Ball Peen Hammer
Pop Rivet Gun
Paint Brush
Cross Tip Screwdriver
SUPPLIES: Silicone Sealant (Item 25, Appendix E)
Wood Block
Pop Rivets
Paint (Item 19, Appendix E)
Cheesecloth (Item 6, Appendix E)
Salvaged Ventilation Duct
a. Turn off air conditioner/heater so air will not blow through duct.
b. Drill rivets from damaged section of duct. Remove joiner plates.
1-102
