TM 5-3610-253-14
d. Firmly press new gasket onto door.
e. Wipe excess adhesive from gasket.
f. Close door and wipe excess adhesive from door and frame.
Allow adhesive to dry before using door.
g.
MOS: 63W, Wheel Vehicle Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS: Pop Rivet Gun
Electric Drill and Bits
Hoist
3/4 in. Combination Wrench
Paint Brush
SUPPLIES: Personnel/Cargo Door
Pop Rivets
Vinyl Gasket
Paint (Item 18, Appendix E)
Paint (Item 19, Appendix E)
Adhesive (Item 3, Appendix E)
Cheesecloth (Item 6, Appendix E)
1-94
