TM 5-3610-253-14
e.
Remove transparent cover.
f. Remove screws and washers to remove level indicator.
Replace level assembly and secure with screws and washers.
g.
h. Reinstall transparent cover.
i.
Install new gasket.
Reinstall frame and secure with screws and washers.
j.
MOS: 83FJ6, Reproduction Equipment Repairer
41B, Topographic Instrument Repair Specialist
TOOLS: Cross Tip Screwdriver
Scissors
SUPPLIES: Rubber Adhesive (Item 2. Appendix E)
Nylon Screen (Item 24, Appendix E)
a.
Raise access cover and remove screws holding screen frame to section.
b. Remove screen and frame.
c.
Clean all old screen material and adhesive from frame.
d. Cut new screen material to size and attach to frame with adhesive.
e.
Reinstall frame to section and secure with screws.
Lower cover.
1-82
