TM 5-3510-253-14
f.
Remove power cord from defective fan assembly.
Install new fan.
g.
h.
Install new power cord.
Connect wires with wire nuts and remove tags.
i.
Tighten cable clamp screws.
j.
Reinstall cover.
k.
Secure with screws.
l.
Reinstall fan assembly. Secure with screws.
m.
Plug in power cord.
Rep lace Exhaust Fan Cover.
MOS: 83FJ6, Reproduction Equipment Repairer
41B, Topographic Instrument Repair Specialist
TOOLS: Drill and Bits
Pop Rivet Gun
Scraper
SUPPLIES: Pop Rivets
Exhaust Fan Cover
Gasket
Solvent P-D-680 (Item 26, Appendix E)
Adhesive (Item 2, Appendix E)
Cheesecloth (Item 6, Appendix E)
Impermeable Gloves
Goggles
Drill pop rivets from hinged cover to remove vent cover.
a.
1-74
