TM 5-3610-253-14
consists of activation of power after the section has been located at the operation
site and 12 V dc power disconnected.
1-6.1 Preparation for Use.
Procedures for leveling.
a.
CAUTION
Trailer-mounted section must be on surface that is approximately level to
avoid unnecessary stress or twisting of chassis when section is leveled.
NOTE
Snow or ice should be removed from under leveling foot plate before attemp-
ting to level section.
Sand, soft ground, or mud requires that shoring or scrap material be placed
under leveling foot plate to increase surface area and prevent sinking
into surface.
Be sure that air suspension is deflated as indicated in TM 5-2330-305-14.
(1) Deflate air suspension in accordance with TM 5-2330-305-14.
(2) Approximately level trailer chassis by raising or lowering landing
gear.
1-24
