TM 5-3610-253-14
Table 1-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES--Cont.
(Number)Hundreds of Hours
ANAnnually
WWeekly
B--Before
MMonthly
S Semiannually
D-During
BI Biennially
AAfter
Q Quarterly
For Readiness
ITEM TO BE INSPECTED
Reporting,
IN-
Equipment Is
Not Ready/
ITEM
PROCEDURE
TER-
Available If
NO.
VAL
VAN BODY--Cont.
1
Inspect
Exterior-Cont.
Lock disengaged.
10.
B/D
Inspect front and rear van body locks to be sure locks are fully
engaged.
/A
Inspect gaskets on personnel doors for leaks or damage.
11.
Q
Missing binge pins.
Inspect hinges for proper placement of hinge pins.
W
11.1
Clean and paint blistered, pitted, or flaking areas and bare
12.
Q
metal spots in accordance with instructions contained in TM
43-0139, Painting Instructions for Field Use.
Inspect Interior.
2
Emergency lights
1.
Test emergency lights by pressing test button.
B/D
do not light.
Wires or cables
Inspect power cords and cables to be sure wires are not kinked,
W
2.
are cracked or cut.
cut, or cracked.
Inspect plug connectors to be sure all plug connectors are tight
W
3.
and firmly seated. Tighten if necessary.
Inspect for burned out light bulbs and fluorescent lamps.
D
4.
Replace as required.
Inspect walls, ceiling, and floor for holes, open seams, or signs
W
5.
Leaks are present.
of seepage or leaks.
Hinge, latch, or
Check storage cabinets for broken hinges, latches, and locks.
D
6.
lock is broken.
1-18
Change 2
PIN:
058779-002
